Once you find a beacon, the distance to it is displayed. One thing I found odd about this app is that although I had set new names for a RadBeacon USB and a RadBeacon Tag, they still showed up in Locate for iBeacon as generic beacons with a name of Radius Networks 2F234454. The Locate for iBeacon app (free, universal, optimized for iPhone 5) is what you can use to locate those pesky RadBeacons (and other iBeacons). When everything is set up the way you want it, it's possible to lock the device so that third parties can't reconfigure it.īy subscribing, you are agreeing to Engadget's Terms and Privacy Policy. ![]() Once calibrated, you can measure the proximity of the beacon with the app as well. There's also a way to calibrate the measured power of the beacon by holding it at a set distance away, then letting it go through a calibration process. To update any of those settings, you just enter a valid PIN (which you can also apply), then change the settings and hit Apply. Tapping on a discovered beacon shows its name and advertised UUID identifier, major identifier, minor identifier, power value, rate setting, and transmit power setting. You can scan for configurable RadBeacons with a single swipe gesture, and each discovered beacon displays its name, model, and ID. The free RadBeacon app (universal, optimized for iPhone 5) is used to configure RadBeacon proximity beacons. ![]() The US$29 RadBeacon USB (left in image at the top of this post) is a tiny USB dongle that can be plugged into any standard USB adapter for power, while the $39 RadBeacon Tag (the white tag in the middle of the top image) is a battery-powered tag that is perfect for those situations where power may be an issue.īoth the devices work with apps from Radius Networks as well as any other apps that are aware of iBeacons. Well, Radius Networks is now rolling out the hardware in the form of what it calls RadBeacons, and I recently had a chance to try out two models and configure them with their own unique names. The idea of low-power Bluetooth beacons that can coax apps into providing information about something that's near them is very cool, and a while back I wrote about some apps available from Radius Networks that provided a way to start playing with the technology without investing in any physical iBeacons. Also, this prevents your beacon from being connected to by other Bluetooth central clients.Although I'm not a developer by any stretch of the imagination, I find the concept of iBeacons to be fascinating.You should do this as soon as you can as CONFIGURABLE mode causes more significant battery consumption that ON mode.When you have finished configuring your beacon, you can exit CONFIGURABLE mode and return to ON mode by clicking the button once so that you see a SINGLE GREEN FLASH.This indicates that the beacon has transitioned to the CONFIGURABLE mode. From the ON mode, press and hold the button for approximately 5 seconds, or until you see a DOUBLE GREEN FLASH.Now that you are a beacon button expert, click the button again so that you see a SINGLE GREEN FLASH and set your beacon back into ON mode.This indicates that you are back in OFF mode. Click the button once again and you should see a SINGLE RED FLASH.This indicates that the beacon has transitioned to the ON mode. Click the button once and you should see a SINGLE GREEN FLASH.You can set the beacon into various operating modes by using the silicone cap button. CONFIGURABLE - Beacon is discoverable and connectable by a valid configuration app like RadBeacon for iOS, Android or OS X.ON - Proximity advertisements are being transmitted.OFF - No advertisements are being transmitted.The RadBeacon Dot beacon has several operating modes.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |